Targeting the pain points of limited space and inconvenient maintenance in small water purification equipment, it adopts a compact design with a height of only 90mm, saving 40% installation space compared with traditional water caps. The embedded clip structure allows tool-free installation and disassembly, enabling users to replace and clean it independently, reducing maintenance costs. Compared with plastic water caps, 304 stainless steel has stronger impact and aging resistance, with a service life of more than 5 years, avoiding the trouble of frequent replacement. The 0.3mm filtration gap is precise and uniform, effectively intercepting resin particles, sediment, and other impurities, while maintaining a rated flow of 80L/min to meet the simultaneous water use demand of multiple points in households. The polished surface has no sanitary dead corners, preventing bacterial growth and ensuring drinking water safety. With a maximum working pressure of 8bar, it adapts to the working conditions of most small water purification equipment without deformation or leakage risk.
Integrally stamped from 304 stainless steel, the water cap has a total height of 90mm, a bottom clip diameter of 45mm, adapting to installation holes of small filter tanks with a diameter of 300~600mm. The filtration gap width is 0.3mm, evenly distributed on the side of the cap body, with an open area ratio of 32%. The rated flow is 80L/min, with no deformation or leakage under a maximum pressure of 8bar. The applicable temperature range is 0℃~90℃, suitable for cold and warm water scenarios. Each water cap weighs 120g, with a mirror-polished surface and roughness Ra ≤0.6μm, leaving no sanitary dead corners. The clamping force of the clip structure reaches 500N, with no falling-off risk under water flow impact. The product size tolerance is controlled within ±0.2mm, perfectly adapting to tank installation holes. The service life can reach more than 5 years, far exceeding the 2-year service life of ordinary plastic water caps.
It is mainly used in household central water purification systems and small commercial water softeners, intercepting sediment, rust, and residual resin particles after regeneration to improve effluent quality. In small commercial places such as barbershops and beauty salons, it can be used in water softeners to reduce damage to hair and skin caused by calcium and magnesium ions in water. In addition, it can be applied to villa courtyard fish pond filtration systems and small landscape water treatment equipment to remove suspended solids and algae and keep water clear. The embedded clip design allows users to install and maintain it independently without professional on-site service, reducing service costs. The compact design adapts to the limited space of small tanks, requiring no equipment modification, and can directly replace original plastic water caps to improve overall equipment performance.
Post RFQ
Chat
ALL CATEGORIES