The key advantage of this product lies in its precise mesh size control, with a minimum customizable mesh size of 0.5mm×0.5mm to meet precision filtration requirements. Constructed from 304 stainless steel, it offers good heat resistance and can operate steadily over long periods at 120℃ without deformation. The polished surface is smooth and burr‑free, helping prevent scratches on filtered materials. Compared with traditional woven filter screens, this expanded mesh features a high opening rate of up to 50%, more stable filtration efficiency, and a lower risk of clogging. Its one‑piece structure eliminates welding points, reducing the possibility of damage caused by solder detachment and effectively addressing common industry problems such as short service life and easy breakage of traditional filter screens.
The detailed technical parameters include: using 304 stainless steel as the base material, customizable mesh opening size ranging from 0.5mm×0.5mm to 10mm×10mm, wire diameter range from 0.6mm to 1.5mm, standard roll specifications of 0.6m and 1.0m in width, customizable roll length from 5m to 20m, weight per square meter ranging from 1.5kg to 2.5kg, maximum tensile strength up to 600MPa, complying with ASTM A480 and EN 10088-3 industry standards. It passes 800 hours of neutral salt spray test without rust, and the surface polishing roughness reaches Ra0.8μm, meeting food contact hygiene standards.
It is mainly used for juice filtration in food processing plants, raw material screening in the pharmaceutical industry, solvent filtration in the chemical industry, suspended matter filtration in sewage treatment plants, and material screening in mineral processing. It can also be used for precision component protection in the electronic industry, adapting to various industrial scenarios requiring high-precision filtration and corrosion resistance.
Post RFQ
Chat
ALL CATEGORIES