Global B2B Deals, One Click Away
Connect, Trade, Grow Globally
Product Features
120 Products
Marine Special Anticorrosive Coating

Marine Special Anticorrosive Coating

$219.99
coating type: chlorinated rubber modified epoxy
dry film thickness: 0.12-0.15 Millimeters
temperature resistance range: -10℃~60℃
salt spray resistance: over 8000 hours
certification: IMO MSC.1/Circ.1440 compliant
applicable base material: ship steel plate, deck, ship side
curing method: room temperature curing
color: navy blue/gray optional
CONTACT NOW
Marine Heavy Zinc-Rich Epoxy Anti-Corrosion Coating

Marine Heavy Zinc-Rich Epoxy Anti-Corrosion Coating

$395
Zinc Content: 85% by Weight
Dry Film Thickness: 150-200 Microns
Application Method: Airless Spray
Curing Time: 12 hours at 25°C
Cathodic Protection: Active Cathodic Rust Prevention
Seawater Corrosion Resistance: 2000 Hours
Temperature Resistance: -10°C to 80°C
Compatible Substrates: Steel, Cast Iron, FRP
CONTACT NOW
Marine Underwater Self-Polishing Anti-Fouling Coating

Marine Underwater Self-Polishing Anti-Fouling Coating

$36.5
Dry Film Thickness: 150-200 μm
Antifouling Agent Content: 35% wt
Salt Spray Resistance: ≥5000 hours
Operating Temperature Range: -20℃ to 80℃
VOC Content: <60 g/L
Coating Type: Self-polishing Antifouling
Coverage Per Liter: 3-4 ㎡
Full Curing Time: 36 hours
CONTACT NOW
DIY Portable Metal Repair Anti-corrosion Coating

DIY Portable Metal Repair Anti-corrosion Coating

$3.99
coating_type: acrylic modified epoxy anti-corrosion repair coating
temperature_resistance_range: -30℃~80℃
adhesion_grade: ISO 2409 Grade 2
drying_time: Surface dry: ≤10min, Hard dry: ≤4h
applicable_substrates: steel, aluminum alloy, galvanized sheet
repair_area: 1 can can repair about 2㎡ (dry film)
dry_film_thickness: 30~50μm
salt_spray_resistance: 1000 hours without rust
CONTACT NOW
Portable Single-Part Anti-Corrosion Touch-Up Coating

Portable Single-Part Anti-Corrosion Touch-Up Coating

$8.99
fast curing: 30 minutes touch dry
single-part formulation: no mixing required
portable packaging: 16 Fluid Ounces per aerosol can
adhesion strength: 3.5 MPa minimum
acid resistance: good
salt spray resistance: 1000 hours minimum
applicable substrates: steel, iron, galvanized steel
curing method: air curing
CONTACT NOW
Photovoltaic Backsheet Anti-Corrosion Coating

Photovoltaic Backsheet Anti-Corrosion Coating

$9.8
Coating Thickness: 30-50μm
Salt Spray Resistance: 1000+ hours
UV Resistance: 2000 hours without chalking
Temperature Resistance Range: -40℃ to 140℃
Flame Retardant Rating: UL 94 V-0
Transmissivity Loss: <1%
Hydrophobic Performance: Water contact angle ≥110°
Anti-Pollution Performance: Easy to remove dust and dirt
CONTACT NOW
Ceramic Composite High Temperature Resistant Insulating Paint

Ceramic Composite High Temperature Resistant Insulating Paint

$42
Maximum Heat Resistance: 1800℃
Insulation Resistance: 10^12 Ω·cm
Dry Film Thickness: 30-60μm
Touch Dry Time: 25 mins
Overcoat Dry Time: 18h
Adhesion Grade: Grade 1
Dielectric Strength: 25kV/mm
VOC Content: ≤35g/L
CONTACT NOW
High Temperature Silicone-Based Paint

High Temperature Silicone-Based Paint

$34.99
Maximum Heat Resistance: 1200°F (649°C)
Solid Content: 55±2%
Dry Time (Touch): 30 mins
Dry Time (Full Cure): 24 hrs
Adhesion Strength: 5 MPa
Available Colors: Silver, Black, Gray
VOC Content: < 50 g/L
Packaging Specification: 1 Gallon per Container
CONTACT NOW
Conductive High Temperature Resistant Electromagnetic Shielding Paint

Conductive High Temperature Resistant Electromagnetic Shielding Paint

$59.99
Volume Resistivity: 10^-3 Ω·cm
Maximum Heat Resistance: 1112°F (600°C)
Electromagnetic Shielding Effectiveness: ≥ 40 dB (10kHz-1GHz)
Adhesion Strength: 4.5 MPa
Coating Hardness: 3H
VOC Content: < 50 g/L
Curing Temperature: Room Temperature to 300°F
Dry Time (Touch): 20 mins
CONTACT NOW
1200℃ Inorganic Ceramic High Temperature Resistant Paint

1200℃ Inorganic Ceramic High Temperature Resistant Paint

$85
Maximum Heat Resistance Temperature: 1200℃
Main Binder: Inorganic Potassium Silicate
Color: Light Gray, Dark Gray, White
VOC Content: 0g/L (100% Solid)
Curing Method: High Temperature Baking (200℃ for 1h)
Adhesion Grade: Grade 0 (Cross-cut Test)
Thermal Conductivity: 0.03W/(m·K)
Shelf Life: 6 Months (Sealed)
CONTACT NOW
scroll_to_top