Solar In-Ground Light

Basic Info

An ultra-thin,recessed solar ground light with a fully sealed IP68 structure for embedding directly into ground surfaces,stair risers,or walls.The scratch-resistant tempered glass surface provides soft functional or decorative lighting without disrupting the ground plane or foot traffic.

Key attributes

origin

China

Material

304 Stainless Steel Body

Luminous Flux

80-100 Lumens each

Light Source Type

LED

Waterproof Rating

IP68

Lighting Time

6-8 hours

Battery Capacity

1200mAh

Battery Type

Polymer Lithium-ion

Solar Panel Type

Monocrystalline

Installation Method

Recessed

Customer reviews

James Wilson · Homeowner

Installation was very straightforward, and it completely solved the lighting issue for our backyard path. The light is soft and even, and the automatic dusk-to-dawn feature is very smart. It held up reliably through the entire rainy season. It's worth noting that brightness can decrease after a full week of continuous rain, but under normal weather conditions, it meets all our needs perfectly.

Grace Taylor · Winery Owner

Made a light from an old wine bottle, hung under the grape trellis—unique and eco-friendly. The smart lid seals well, withstanding rain. The warm, dotted glow is perfect for romantic dinners. Note: the bottle glass isn't tempered, so avoid sharp impacts when hanging.

Thomas Fischer · IT Consultant

Installed under our garden pergola. The APP control is very convenient for remote operation and dimming. Integration with our home smart speaker for voice control is a great time-saver. The color temperature shift creates distinct atmospheres for dinner versus parties. One note: the cable for the separate solar panel needs to be secured properly to avoid tripping. Overall experience far exceeds traditional solar lights.

Product Description

Product Features

Extremely slim design integrates seamlessly into hardscapes.The 304 stainless steel housing resists corrosion and compression.The surface can be custom laser-cut with patterns,casting unique light and shadow effects.Installation requires pre-excavation and a concrete base for long-term stability.Completely wire-free with minimal maintenance.

Product Specifications

Diameter:150mm or 200mm options;Thickness:35mm;Beam Angle:120°;Color Temperature:3000K(Warm White)/6000K(Cool White);Weight:0.7kg;Required burial depth:≥100mm.

Product Applications

Used for modern garden walkways,driveway borders,pool decks,stair riser lighting,wall skirting illumination,and plaza pattern displays.Its primary functions are safety guidance,spatial definition,and enhancing nighttime ground aesthetics with refined light patterns.

Frequently Asked Questions (FAQ)

Q：How deep a hole is needed to install a Solar In-Ground Light?

A：Typically, dig a hole about 10-15 cm deep and slightly wider than the light body. Refer to the manual for exact depth to ensure the light sits flush with the final ground level.

Q：Can Solar In-Ground Lights withstand a car driving over them?

A：Yes. Our Solar In-Ground Lights are rated for over 2 tons, made with high-strength stainless steel and toughened glass for driveways and parking areas, tolerating slow vehicle passage.

Q：Is the light from Solar In-Ground Lights too glaring?

A：No. They use downward or side-diffused lighting with optimized beam angles, providing soft, non-glare light primarily for guidance and safety, not intense illumination.

Q：Will ice or snow affect Solar In-Ground Lights in winter?

A：The toughened glass and sealed structure resist ice and snow. However, heavy snow cover hinders charging, so clear the surface. Extreme cold (below -25°C) may reduce battery runtime, which is normal.

Q：How do I replace the battery in a Solar In-Ground Light?

A：For most models, remove the entire light body. The battery compartment is usually at the bottom under a sealed cover. Always replace with a waterproof Li-ion battery of the same voltage and capacity.

Q：Can Solar In-Ground Lights be installed in wooden decks?

A：Yes, but carefully. Cut a precise hole in the decking and leave a small gap (~1-2mm) around the light to accommodate wood expansion/contraction, preventing cracking from pressure.